Filter By:
- Parts & Accessories (42)
- Cranksets (124)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Cranksets
$92.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$92.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$17.00
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included
$41.99
Get back on the road with a genuine replacement crankset.
Genuine replacement parts
Keep your bike operating as it should.
- Aluminum arms
- Chainring included
$55.99
Get back on the road with a genuine replacement crankset.
Genuine replacement parts
Keep your bike operating as it should.
- Adjustable arm length from 127mm to 152mm
- Hardware included
$1,149.99
The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.
Individual meter calibration for the most accurate results.
Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.
Additional features:
- +/- 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side
- Weight: Only adds 35g to base crankset
- Battery Life: 175+ hours (via 2 coin cell: CR2032)
- Power range (Watts): 0 to 2500
- Cadence range (rpm): 20-220
- Water resistance rating: IPX7
In the box
- Non-drive-side power meter
- Drive-side power meter
- Shimano chainrings
- 2x high quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrade.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$759.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP road drivetrains.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
In the box
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$399.00
$553.99
28% Off
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5% accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
- Sizing Options:
- Lengths: 165mm, 170mm, 172.5mm, 175mm
Includes:
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$64.99
Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset.
- High-quality anodized finish
- Precise and reliable shifting
$85.99 - $89.99
- Material: Aluminum
- Chain Compatibility: Super narrow HG 9 speed
- Pedal Spindle: 9/16''
- Bottom Bracket: Not included - BB-UN26 or BB-UN55, 123mm
$75.99 - $83.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings.
- Spindle Interface type: Square Taper JIS
$42.99
- FC-M315-2 double crankset for 7 and 8 speed drivetrains
- Simpler and faster shifting than triple cranks
- 22-36 gearing, perfect for trail riding
- 48.8mm chainline, designed for 135mm QR and 142mm thru-axle frames
- Aluminum crank arms
- Highly durable riveted steel chainrings
- Crank bolts included
- Requires LL123 square taper bottom bracket
$109.99
- 2-PIECE CRANKSET for 135, 142 and 148 mm O.L.D. frames
- Q-factor 178.5 mm
- Chain Line 52 mm
- Precise and reliable shifting for 1x10/11-speed
$104.99
- 2-PIECE CRANKSET for 135, 142 and 148 mm O.L.D. frames
- Q-factor 178.5 mm
- Chain Line 52 mm
- Precise and reliable shifting for 1x10/11-speed
$169.99
- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames
- DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention
- Q-factor 172 mm
- Direct mount chainring
- Chain Line 52 mm
- 1x12-speed
$169.99
- 2-PIECE CRANKSET for 157 mm O.L.D. frames
- DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention
- Q-factor 181 mm
- Direct mount chainring
- Chain Line 56.5 mm
- 1x12-speed
$59.99
- Shimano, FC-MT500 Crank Arm, Crank Arm, 170mm, Hollowtech II, Black, Y1VB98030
$174.99 - $194.99
- Series: SORA
- Crank Construction: 2-piece crank construction
- Bottom Bracket: BB-RS500, BB-RS500-PB
- Chain Line: 43.5
- 9-speed
- Four-arm BCD
$169.99 - $179.99
Salt Plus Pro 48 cranks have curved trapeze-shaped crank arms and are made of heat-treated seamless chromoly.
- Tubular chromoly arms (heat-treated), chromoly spindle
- Curved trapeze shaped crank arms
- Heat-treated seamless chromoly
- Left & right side sprocket bolt boss
- Includes bottom bracket
- Bore: 19
- Spindle Material: Steel
- Drive Side Compatibility: Right and Left Hand Drive
- Crank Arm Material: Steel
- Crankset Style: 3-Piece
- BB Style: Mid
- BB Included: Yes
$17.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact.
- Injection molded plastic crank arm protection
- Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes
- Material: Injection molded plastic
- Recommended Group: XX1, X01, XX, X0
$108.00 - $148.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems.
- Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks
- 32T direct mount X-SYNC 2 steel chainring included
- Aluminum crank arms
- 11/12-speed compatible
- Bottom bracket sold separately
$179.99
The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice.
- Its forged 7050 AL construction optimizes stiffness without added weight
- The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options
- Can run alloy or steel CINCH direct mount chainrings
- Boost-compatible 24mm EXI interface spindle
- Direct mount chainline: 51mm / 57.5mm (Flipped Ring)
- 2X Cinch spider chainline: 49.5mm
- Boost 2X Cinch spider chainline: 52.5mm
- Number of Chainrings: No Rings, No Spider Included
- Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: RaceFace EXI
- Chainring BCD: Direct Mount CINCH
- BB Included: No
- Chainring Included: No
$12.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$12.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$12.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
$21.99
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 2.5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin
$30.49
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin
$100.49
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
$100.49
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Page 1 of 6
Next page