Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$19.99
- Christophe Vintage leather strap - Celebrating 130 years of history - 370mm long - Metal buckle
$33.99
- Christophe Vintage toe-clip - Celebrating 130 years of history - Steel cage - Chrome finish - 01: S/M; -02: L/XL
$2.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$5.99
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement
$42.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$35.00
Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System In the box - Y-shaped charging cable - Charging clips (x2)"
$59.99
- Compatible with all Shimano SPD type pedals - SPD cleat design to be assembled on LOOK style shoes
$25.00
- Pedal Carbon blade Kit TIME XPro QTY 4
$33.00
- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.
$33.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$33.00
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$33.00
- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Pedal Grip pins/bolts and 4 tension screws TIME SPECIALE 8/12
$35.00
- Pedal Cover Cap Left/Right Top replacement TIME XPro
$49.00
- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws
$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip
$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included
$49.99
- Crank boots compatible axle rebuild kits for SPIKE and OOZY pedals (with bright green friction seals), produced in 2015 or later. Bearings must be purchased separately. - Crank boots compatible axle - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs
$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately
$54.99
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut
$23.99
- Fits SPD-SL cleats - Cleat Bolt Pattern: 3-Bolt
$43.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
$34.99
RaceFace Chester Pedal Rebuild Kit
$21.00
Everything you need to fully rebuild your OneUp Composite Pedals. KIT CONTAINS - 2 CARTRIDGE OUTER BEARINGS - 2 INNER DU BEARINGS - 2 OUTER SEALS - 2 AXLE NUTS
$26.00
HEIGHT ADJUSTMENT WASHERS AND PINS FOR OUR ALUMINUM PEDALS KIT CONTAINS - 40 - HEXIGONAL TIPPED M4 THREADED SOCKET HEAD PINS - 40 - 0.8mm THICK HEIGHT ADJUSTMENT WASHERS
$9.99
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.
$19.99
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat
$19.99
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.
Page 1 of 2 Next page