The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
This interactive trainer offers the most advanced brake of all the Tacx trainers with rear-wheel drive, so you can enjoy a highly realistic cycling experience. The motor brake is able to apply a maximum power of 1500 W to the back wheel and will speed up during a descent. The slopes simulated are realistic up to 20% and down to -5% for descents. The Genius communicates via ANT+ and Bluetooth Smart for convenient training sessions using your smartphone or tablet. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. The Genius offers ease-of-use and freedom of choice. When the Genius Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Motor brake -Realistic slope 20% 1 -Descent simulation -5% -Max brake power (10 sec.) 1500 Watt -Mass inertia 125 kg 2 -Suitable for all bikes, if necessary with axle skewers or nuts -Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
$850.00 $999.00 15% Off
The Bushido is an interactive Smart trainer with wireless motor brake. It’s wireless motor brake, with a maximum resistance of 1400 Watts, ensures smooth pedaling, even during steep climbs. The Bushido powers itself and is therefore completely wireless, it doesn’t even need a power cable. Instead of training with a handlebar computer you can connect the trainer to the Tacx apps quickly and easily. Just like the other Smart trainers, the Bushido uses ANT+ and Bluetooth® Smart to communicate with the connected device for convenient training sessions. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the Bushido Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Since the Bushido is not hooked up to the power net, you can use this trainer anytime and anywhere. Even when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Automatic Resistance unit Wireless motor Realistic slope 15% 1 Descent simulation - Max brake power (10 sec.) 1400 Watt Sprint power (1 min.) 750 Watt Mass inertia 60 kg 2 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
The Kinetic Smart Control Power Unit installs in minutes and is the most affordable and convenient option for upgrading any Kinetic Rock and Roll or Road Machine trainer frame to our most advanced, resistance-controlled power training experience. A massive flywheel provides a realistic road feel with app-controlled resistance, super-quiet operation, accurate and reproducible data and the ability to make it all work for you on any bluetooth connected device with a world of training possibilities with apps like Kinetic Fit, Zwift, TrainerRoad, Rouvy, Kinomap Trainer and FulGaz.
Turn your basement into a hellish winter sweat cavern as you dream of summer climbs and fitting back into your spandex. With a little help from the Kurt Kinetic Road Machine | Smart Trainer, you'll be creating puddles beneath your stallion and engaging in endless suffering of your own free will. With on-board power training, the Road Machine Smart App links up with Siri (or the faceless automaton Android AI) to make sure you ain't kidding yourself with those intervals you're "throwing down." When you're screaming, "There's no more?!" at your television after binge-riding through all four seasons of Battlestar Galactica, the Road Machine | Smart Trainer will even hold your interest with tailored workouts. So, let's not hear anymore of that "It's too cold to ride" business. The Road Machine | Smart Trainer will have none of it! - Stable, durable trainer frame - Unconditional lifetime warrantly - Frame fits 22-inch to 29-inch wheels - Large diameter roller - Pairs with devices using Bluetooth Smart - Ergonomic rubberized knobs and feet - Progressive fluid resistance - Fully assembled - Folds flat for easy storage
Kurt Kinetic’s Road Machine 2.0 Fluid Trainer features a fluid-based unit for smooth, progressive resistance that matches your effort for a true outdoor simulation. With a 6.25 lb. flywheel and a sealed fluid chamber pushing back, you get a natural resistance feel and a lower operating temperature for consistency to 3000 watts and beyond. When it's time to store or transport the unit, simply fold up the legs and tuck it away. And, thanks to the 2 1/8-inch roller, tire wear is reduced significantly.
$425.00 $499.00 15% Off
The Satori Smart trainer uses complex technology in a user-friendly fashion. The resistance is set manually with the handlebar resistance lever offering 10 different resistance positons, from very easy to very strong. The Satori Smart can communicate via both ANT+ as well as Bluetooth® Smart. In the resistance unit an accurate measurement of your speed, cadence and power is performed. This data is then shown on the screen your using, whether this is a tablet, smartphone, sportwatch, or something else. During or after a training session you, or your coach, can thus monitor your performance closely. Since the Satori is not hooked up to the power net, you can use this trainer anytime and anywhere, also when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Handlebar resistance lever Resistance unit Magnetic Realistic slope 10 positions Descent simulation No Max brake power (10 sec.) 950 Watt Sprint power (1 min.) 800 Watt Mass inertia 16.93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Do you want to work on your rhythm, make your muscles more flexible or refine your coordination and technique? Then use the Antares rollers. You can cycle freely, just like on the road or track. If you find it difficult to cycle unsecured you can use the Antares bracket. The Antares is collapsible and is easy to transport. Some cyclists keep finding it hard to ride without a restraint. They choose the Tacx Antares and use the support for Antares to secure the bike, without the front wheel, and still cover the mileage in front of them. Riding on ‘the Tacx’ is a relatively easy way to up your track pace and make your muscles more supple. This makes for completely natural movements. You keep pedalling from the hips, just as you would on the road or track. A high pedalling frequency, that is needed for the right feeling in the legs, is also possible. The Tacx Antares is the official warming-up trainer at the 2012 Olympic Games.
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
The Blue Twist is streamlined and simple, featuring the performance Tacx's Blue trainers are known for, but without a handlebar resistance lever. You manually set the resistance, selecting one of the seven positions using a switch on the brake. The maximum resistance is 700 Watt. The Blue Twist is suitable as an entrance model. Software: PC/laptop - Operation: Switch on brake Resistance: unit Magnetic Braking positions: 7 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheel diameter: 26"- 29" and 700c; 29" with trainer tyre
Protect your fine Kurt Kinetic trainer and make it easy to transport with their Trainer Bag. This sturdy nylon bag is large enough to hold your Kurt trainer and Riser Ring, and it's easy to carry thanks to the strong handle and removable shoulder strap. The Trainer Bag zips closed and has a handy zip front pocket, too. Kurt Trainers and Riser Rings are sold separately.
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Page 1 of 1