Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$25.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
$20.00
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
$54.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
$8.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$12.99
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
$27.99 - $35.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
$9.99
Local/Central Universal Light Mount replacement strap. Compatible with: - Central 100 Front Light - Central 20 Rear Light - Local 75 Front Light - Local 50 Front Light - Local 20 Rear Light - Local 15 Rear Light - Local 10 Rear Light
$5.49
Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump
$19.99 - $22.49
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$14.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$67.49
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
$59.99
New design in full metal with longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the SmartHead DX pump head includes extra long and mounting hardware. - Head: Full metal SmartHead DX1-Fits Presta/Schrader - Material: Aluminum head Rubber hose - Pressure Tuning: Air release button - Size: 8.3 x 5 x 2.6 cm / 3.3” x 2” x 1” (head)-110 cm (hose length) - Weight: 91 grams
$48.99
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
$59.99
New design in full metal to quickly identify Presta and Schrader sides. Longer lever for easier use. Lower profile air release button to minimize unintended pressure release. Upgrade any existing pump to the TwinHead DX pump head includes extra long and mounting hardware. - Head: Full metal TwinHead DX1 Fits Presta / Schrader / Dunlop - Material: Aluminum head / Rubber hose - Pressure Tuning: Air release button - Size: 8.2 x 5 x 4.3 cm / 3.2” x 2” x 1.7” (head); 110 cm (hose length) - Weight: 100 grams
$59.99
Adapts Presta valve stems for use with standard Schrader pumps.
$41.99
- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen
$247.50
Airspy Wheel Mounted Air Sensor—Schrader mounts on the wheel/valve and gives constant readout of tire pressure on either the SKS MYBIKE app or Garmin device. - For front and rear wheels - Includes battery and security lock - For Schrader valve stems - Reads to 8.3 bar / 120 psi - Weight: 18 grams
$10.00
Barrel Washer for Floor Pump may need replaced after several years of pump use. For best results barrel washers should be lubricated with a silicone-based lube. Barrel washers ordered from this site will come with lubricant already applied. - 30mm Barrel Washer (11687) fits Rennkompressor and Airmotion 12.0
$10.00
Barrel Washer for Floor Pump may need to be replaced after several years of pump use. For best results barrel washers should be lubricated with a silicone-based lube. Barrel washers ordered from this site will come with lubricant already applied. - 35mm Barrel Washer (10151) Fits Air X-Press 8.0, AirKompressor Compact 10.0, AirKompressor 10.0, Air X-Plorer 10.0, Air X-Plorer Digi 10.0, Airworx 10.0
$19.00
Smart-style head will retrofit to any SKS pump. - Presta/Schrader/Dunlop
$22.00
The classic SKS Multi Valve head has been completely revamped! Now you can seamlessly lock the pump head with one finger. The new MV EASY head features improved functionality, a sleek design, and better handling. The head is made of high glass fiber-reinforced plastic. This head features separate holes for use on either Presta or Schrader valve types. Say goodbye to unwanted whistling and stuck check valves, thanks to the new Rocker technology that SKS Germany has put in the new MV EASY pump head. - Max Pressure: 230 PSI - Will work with all SKS floor pumps
$31.00
Replacement MV EASY Multi-Valve head with hose. This item is compatible with the Air X-Plorer 10.0, Airmotion 12.0, and the Air X-Plorer Digi 10.0. The kit contains an MV EASY multi-valve head and a 1200mm hose.
$51.50
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
$7.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$6.99
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$16.99
160 PSI replacement analog pressure gauge for all standard travel floor pumps; includes glue and O-ring. With a 1.5-inch face, this gauge increases visibility and allows a precise measurement of tire pressure.
$22.99
220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.
$54.99
350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.
$19.99
- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
$27.99
Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.
Page 1 of 2 Next page