Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
The Alloy Digital Drive is a durable bicycle floor pump with a beautifully constructed CNC-machined aluminum barrel and base. It has a stylish wood handle with an aluminum junction and a steel piston built to last a lifetime. Highly accurate, easy-to-read 3.5” (88.9 MM) digital gauge. Extra long, nylon-reinforced braided hose with aluminum couplers. ABS1 Pro equipped. - CNC machined aluminum construction - Precision 3.5-inch hi-visibility digital gauge - 220 PSI - Varnished wood handle with aluminum junction - Extra-long nylon reinforced braided hose with aluminum couplers - ABS1 Pro chuck
The Sport Floor Drive floor pump features a steel barrel and piston with a tough composite matrix base for years of reliable use. Its oversized 3.5-inch gauge makes reading the pressure a breeze. - Extra-long, high-strength hose with composite matrix couplers - Durable, painted finish with varnished wood handle - Standard height - 220 psi max
Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves
Easy inflation The convenience of CO2 with the ever-ready capabilities of a mini pump, the Air Rush Road combines safe, controlled CO2 inflation with the back-up security of a telescoping pump. At just 72g, the Air Rush's compact design easily fits in a jersey pocket or seat pack. Product details - 2-in-1 design combines CO2 inflator and mini pump - Ultra-compact size easily fits in a jersey pocket or seat pack - Includes reusable cartridge insulator to protect hands - Pump inflates tires if you're out of CO2 - 72g - Includes two 16g cartridges, mounting bracket, and required hardware
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A digital shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed-off so you can easily adjust your shock pressure. Digitally dialed Dialed suspension is crucial to a great ride. Upgrading to the Bontrager Digital Shock Pump will make it easy to dial-in front and rear suspension with confidence. It features a large, easy-to-read digital gauge that displays PSI/bar/kg/cm2, a bleed valve for fine-tuning pressure, and a thread-on design that quickly attaches for a reliable, secure connection. Product details: - Easy-to-read gauge accurately reads up to 300 PSI (20 bar) - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks - Displays PSI, bar, or kg/cm2 - Replaceable CR2023 battery Features: Easy-to-read digital gauge A broad, back-lit digital gauge provides accurate pressure readings to a maximum of 300psi (30 bar) Minimize connection bleed off Fast and secure connection minimizes bleed off when connecting and disconnecting Bleed valve to fine tune suspension The bleed valve allows you to release small amounts of pressure to fine tune your suspension to exactly where you want it Specs: - Pump type: Suspension - Valve: Schrader - Gauge type: Digital - Max pressure: 300psi - Frame mounted: No - Dimensions: 292mm (11.5") - Hose length: 25.4cm (10")
$27.99 - $35.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
You’ve paid for full suspension, now it’s time to use all of it. When the trail gets steep and rough, can you tell the difference between 150psi and 170psi by pressing down on your saddle? No, you can't; and neither can we. The Blackburn Honest Digital Shock Gauge can. With pro shop-level precision, and a zero leak valve, the digital readout will ensure you put exactly the pressure you need in your shock. The days of "giving it a bounce in the lot" are over! - Accurate within 1% of pressure - Compatible with all thread on air shocks - Rated to 350 PSI/24 BAR Max - Shop precision quality - Zero leak valve - Replaceable battery - Auto on/off - Easy to read digital gauge - 215g
Local/Central Universal Light Mount replacement strap. Compatible with: - Central 100 Front Light - Central 20 Rear Light - Local 75 Front Light - Local 50 Front Light - Local 20 Rear Light - Local 15 Rear Light - Local 10 Rear Light
Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump
Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb
Mini-pump for Gravel bikes This mini-pump has been developed to fit Gravel bike tyres, ranging from 35 to 47 mm wide. It offers the best compromise between inflation volume, ease of reaching the desired pressure and compactness. Made of aluminium, the Zéfal Gravel Mini is light and very resistant. Its flexible Z-Turn connection will give you peace of mind by avoiding bending or even breaking its Presta valve. - Weight: 105 g - Maximum recommended pressure: 5.5 bar / 80 psi - Length: 180 mm
- Z-switch System (Presta, Schrader and Dunlop compatible) - Wide Gauge - Steel Base for better stability - Ball and Bladder Heads - Max Pressure 9 bar / 130 psi - Hose length: 800mm
- Z-switch System (Presta, Schrader and Dunlop compatible) - Gauge with a magnifying lens - Integrated locking hook - Composite Base for better stability - Ball and Bladder Heads - Max Pressure 11 bar / 160psi - Hose length: 1100mm
- Z-switch System (Presta, Scharader and Dunlop compatible) - In-line Gauge - Ergonomic and lockable T-handle - Double base for better stability - Carrying bag included - Max Pressure: 10 bar / 145 psi - Hose length: 610 mm
Page 1 of 6 Next page