Parts & Accessories

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

End Plug For Femto USB and Stvzo Femto USB Rear

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.

Replacement mounting strap for the Zecto and Femto LED lights.

Replacement mounting strap for the Strip Drive LED lights.

SADDLE MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including a saddle mount used with seat rails.

SEEMEE SEATPOST MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including an adjustable silicon seat-post mount.

Clip mount compatible with Magicshine SEEMEE 60, 100, 180 and 200 bike tail lights. Allowing the red tail light to be clipped onto backpacks, saddle bags, coats or belts.

Upgrade or refresh your bike.

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

Extension Cable - Length: 100cm - Temperature: -20 - 60 degrees - Extension Cable for MONTEER 3500/900s/902s/900

Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash

Replacement Part – Oversized Handlebar Bracket (35mm) - Reinforced internals take more abuse - Fits oversized 35mm mtb bars - No tools needed - Included with USL-1100 & USL-1500 - Weight: 40 grams - Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Lezyne helmet mount for LED bike lights or GoPro action cameras. Follows line-of-sight for optimized night riding or recording. Constructed from durable, mold-injected Composite Matrix construction. Easy to install Velcro strap fits virtually all helmet styles. Compatible with a large number of Lezyne headlights via the GoPro LED Adapter. - Composite matrix helmet light mount with strap system - GoPro adapter

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

Garmin bike handlebar mount for almost all Garmin compatible devices, works on Magicshine Allty 1000/2000(default), Allty 300/500 and lights with Garmin adapter installed, such as most of the 9 series, Eagle series, Bluetooth series and all Monteer bike lights. Hard plastic base with sturdy straps, a hex key(included) is needed to secure it onto the handlebar, once installed, it's non-adjustable, neither vertically nor horizontally. Two extra straps are included that will work with handlebars of most sizes(up to 41mm) including Aero bars. This mount can easily support Garmin devices of moderate weight including bike lights, cellphones, GoPro cameras etc. For compatibility with 900/902/906/900B/902B/906B bike lights, a Garmin adapter is required.

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series