Lights

Magicshine Monteer 6500S is designed to meet and exceed the expectations for even the most aggressive of mountain bike riders. Its lightweight design and extremely high output with perfect beam pattern make it ideal for hardcore mountain biking and off-road cycling. - Lumen: 6500 - Battery: 10,000 mAh with power bank capabilities - Waterproof: IPX 5 - Runtime: 2-40 Hours

SEEMEE 180 is a powerful bicycle tail light with convenient USB recharge. - The max output can be reached up to 180 lumens - Smart motion and ambient light sensor give you enhancing using experience.  - EFFICIENT LIGHT OUTPUT-- Compares to red cover, transparent optical fiber emits stronger and uniform light outputs while consuming less energy. - HIGH VISIBILITY-- SEEMEE 180 allows riders to be seen from up to 2000m, distinguishes you  from the traffic effectively. - SMART MOTION SENSOR-- The motion sensor turns on automatically when braking, and lights on for 3 seconds at maximum 180LM. - SENSITIVE AMBIENT LIGHT SENSOR-- Under smart mode, the built-in light sensor automatically adjusts the brightness according to ambient lighting conditions, thus to increase warning effect efficiently during day and night. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 180 automatically changes to economic flashing mode(27LM), which can run up to 20 minutes before it totally powers off, this feature ideally extends the burning time. - ALL AROUND VISIBILITY-- The translucent hard case gives SEEMEE 180 high side visibility, which lets riders to be seen from all directions. - SMART BATTERY INDICATOR-- At standby mode, click the power button to activate battery indicator for 3s. - EASY TO MOUNT-- With the versatile mounting strap, SEEMEE 180 is easy to be mounted under saddle or different seat posts. - IPX6 WATERPROOF RATE-- SEEMEE 180 is fully sealed, and can resist water from any directions. - EASY TO OPERATE-- Double click to change the mode, short click to cycle through brightness settings, memory function for quick start.

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

For mounting rear lights on Topeak Tubular Rack, MTX BeamRack or any rack with 80 mm (center to center) mounting holes.

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

End Plug For Femto USB and Stvzo Femto USB Rear

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.

Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.

SADDLE MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including a saddle mount used with seat rails.

SEEMEE SEATPOST MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including an adjustable silicon seat-post mount.

Clip mount compatible with Magicshine SEEMEE 60, 100, 180 and 200 bike tail lights. Allowing the red tail light to be clipped onto backpacks, saddle bags, coats or belts.

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm

Use to securely mount serfas tail lights to any compatible rear rack. Serfas Tail Light Compatibility: - TBT-50R Thunderbolt 2.0 - TST-70 Scorpius 70 - TST-100 Scorpius 100 - TST-130 Scorpius 130 - TST-300 Scorpius 300 - TSV-130 Vulcan 130 - TSV-350 Vulcan 350

The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design. - System compatibility: Sentry Aero 260 Daylight Visible Tail Light only - Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap - Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post - Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

- 1 super bright LED - Easy On/Off - Never worry waterproof design - Universal rubber bracket

Garmin to GoPro adapter with a screw handle. Compatible with all bike lights, cameras, GPS, speedometers etc. with male ended Garmin style base. Can be used with Magicshine TTA out front mount, MJ-6272 out front mount, or any compatible Garmin handlebar mount. This unit has 2 prongs and is meant to be inserted into an existing GoPro compatible handlebar or helmet mount. Plastic material, very light weight.

Extension Cable - Length: 100cm - Temperature: -20 - 60 degrees - Extension Cable for MONTEER 3500/900s/902s/900

Replacement Part – Oversized Handlebar Bracket (35mm) - Reinforced internals take more abuse - Fits oversized 35mm mtb bars - No tools needed - Included with USL-1100 & USL-1500 - Weight: 40 grams - Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

Replacement Part – TST Tail Light Belt Clip Improved design keeps light more secure on belt or bag strap. Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R

Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) - batteries included - 50/100 hours of burn time (constant/flash) - 400m visibility

Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) - batteries included - 50/100 hours of burn time (constant/flash) - 400m visibility

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL